Razor Wire Flatwrap
Razor wire flatwrap is a series of razor wire coils clipped into the panel forms for fencing and security purpose. Made into 500mm or 900mm high normally.
Razor wire flatwrap is installed against an existing smooth wire mesh fence and substantially improves the effectiveness of the fence. Installed on this basis, innocent persons are protected from injury by the smooth wire mesh. 500 mm high razor wire flatwrap fitted to our welded mesh fence provides a neat but effective barrier fencing.
Installation of razor wire flatwrap is particularly simple when it is fitted by overlapping the fence mesh. 900 mm razor wire flatwrap installed to a brick wall provides a high barrier.
Flat wrap coils will substantially improve the effectiveness of the fence. Installed on this basis, innocent persons are protected from injury by the smooth wire mesh fence while the potential intruders will get frightened back.
he flat coils provide a neat but effective barrier when used together with mesh fences.
Flat wrap coil installation is particularly simple when it is fitted by overlapping the fence mesh.
It provides a high barrier when mounted to the wall.
Razor wire flatwrap coils
Blade thickness: 0.5mm±0.05
Core wire diametr: 2.5mm±0.1
Blade length: 22mm±1
Blade width: 15mm±1
Blade space: 34mm±1
Material: carbon steel sheet (with electrol galvanized or hot-dip galvanized), stainless steel sheet(304,316,304L,316L)
The quality of raw materials for manufacturing razor wire flatwrap:
These options will help you determine how durable and reliable your fence will work. Galvanized barbed tape thickness should lie between 0.5 - 0.55 mm. Using of a thin coil does not initially affected the efficiency of the concertina wire, but in the long run will reduce the service life of the barricades several times. The wire must be galvanized, and if the wire is black iron without zinc coating, soon you will lose the barricade.
The finished concertina wire coils must be tight. The galvanizing surface of the razor wire flatwrap after compression should not be damaged during the process.
Razor wire flat wrap coils are made of high tensile razor wire, clapped into a flat panel formation.
Flat wrap coils can be used in the following forms:
Installed against the existing smooth wire mesh fence;
Fitted to the welded mesh fence;
Fitted by overlapping the fence mesh;
Installed to the brick wall directly.